TSG Z0007-2023 Guideline of examination for safety quality supervisors and safety quality staffs of special equipment manufacturers
1 General provisions
1.1 Purpose and basis
This Guideline is hereby formulated with a view to implementing the Regulations on supervision and administration of the implementation of main responsibility for quality safety of special equipment manufacturers and standardizing the examination work for the safety quality supervisors and safety quality staffs of special equipment manufacturers.
1.2 Application scope
This Guideline applies to the market supervision and administration departments’ supervised selective examination for the safety quality supervisors and safety quality staffs of special equipment manufacturers [including design, manufacturing, installation, transformation and repair units of boilers, pressure vessels, gas cylinders, pressure pipelines, elevators, lifting appliances, passenger ropeways, large-scale amusement facilities and special purpose motor vehicles in special fields, as well as gas cylinder filling units].
2 Examination requirements
2.1 Examination form
The examination form stipulated in this Guideline is an open-book theoretical examination, either written or computer-based. If conditions permit, it is recommended to carry out online examinations using the mobile terminals allocated for special equipment safety supervision personnel.
2.2 Examination content
The examination content is divided into nine aspects of knowledge content, including boilers, pressure vessels, gas cylinders, pressure pipelines, elevators, lifting appliance, passenger ropeways, large-scale amusement facilities, and special purpose motor vehicles in special fields, or their combinations. See Annexes A to J for details.
2.3 Implementation subject
(1) The market supervision and administration departments at or above the county level shall organize random supervised selective examination for the safety quality supervisors and safety quality staffs of special equipment manufacturers within their respective jurisdictions;
(2) During examinations for the special equipment safety quality supervisors and safety quality staffs by the market supervision and administration departments, participation of more than two special equipment safety supervision personnel is required, who shall show valid administrative law enforcement documents for safety of special equipment, and relevant professional and technical personnel may also be invited to participate as needed.
2.4 Examination arrangements
Generally, the examination is carried out in combination with routine supervision and inspection and special supervision and inspection.
2.5 Examination results
(1) According to the safety management ability requirements of the examination object's position, the special equipment safety supervision personnel shall randomly select a certain number of examination questions, and conduct on-the-spot examination for the special equipment safety quality supervisors and safety quality staffs. If more than 90% of the answers are correct, the examination is passed, otherwise it is failed;
(2) The special equipment manufacturers shall organize training for the safety quality supervisors and safety quality staffs who have failed the examination, and apply for a make-up examination for them within 5 working days to the market supervision and administration department that has implemented the supervised selective examination. Those who fail the make-up examination shall not continue to hold the position.
3 Supplementary provisions
3.1 Interpretation authority
The State Administration for Market Regulation is in charge of the interpretation of this Guideline.
3.2 Implementation date
This Guideline shall come into force as of March 1, 2024.
Annex A
Guideline of examination for safety quality supervisors and safety quality staffs of boiler manufacturers
A1 Examination content for safety quality supervisors of boiler manufacturers
A1.1 General requirements
A1.1.1 Laws and regulations
(1) The Special equipment safety law of the People's Republic of China, the Regulations on safety supervision of special equipment and safety technical regulations on boilers;
(2) The definition and classification of boilers in the Catalogue of special equipment;
(3) The Regulations on supervision and administration of the implementation of main responsibility for quality safety of special equipment manufacturers;
(4) The requirements in the Regulation for production and filling licensing of special equipment for licensing of the personnel, site facilities, manufacturing and processing equipment of boiler manufacturers and for continuous maintenance of licensing;
(5) The requirements for implementing special equipment licensing system and accepting supervision and inspection.
Foreword i
1 General provisions
2 Examination requirements
3 Supplementary provisions
Annex A Guideline of examination for safety quality supervisors and safety quality staffs of boiler manufacturers
Annex B Guideline of examination for safety quality supervisors and safety quality staffs of pressure vessel manufacturers
Annex C Guideline of examination for safety quality supervisors and safety quality staffs of gas cylinder manufacturers
Annex D Guideline of examination for safety quality supervisors and safety quality staffs of pressure pipeline manufacturers
Annex E Guideline of examination for safety quality supervisors and safety quality staffs of elevator manufacturers
Annex F Guideline of examination for safety quality supervisors and safety quality staffs of lifting appliance manufacturers
Annex G Guideline of examination for safety quality supervisors and safety quality staffs of passenger ropeway manufacturers
Annex H Guideline of examination for safety quality supervisors and safety quality staffs of large-scale amusement facility manufacturers
Annex J Guideline of examination for safety quality supervisors and safety quality staffs of manufacturers of special purpose motor vehicles in special fields
