GB/T 45337-2025 Tires intelligent manufacturing - Manufacturing execution system (MES) deployment - General specification
1 Scope
This document specifies the general principles, deployment architecture, management system, data storage services, interface services, equipment sensing layer, and basic network hardware requirements for the manufacturing execution system (MES) for tires intelligent manufacturing.
This document is applicable to the planning, deployment, and implementation of the MES for tires intelligent manufacturing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 25485 Industrial automation systems and integration - Functional architecture of manufacturing execution system
GB/T 36587 Rubber and plastic machinery - Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 25485 and GB/T 36587 apply.
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
AGV: Automated Guided Vehicle
APS: Advanced Planning and Scheduling
BOM: Bill of Material
BI: Business Intelligence
ERP: (Enterprise Resource Planning
HR: Human Resources
MES: Manufacturing Execution System
MQTT: Message Queuing Telemetry Transport Protocol
OA: Office Automation
OEE: Overall Equipment Effectiveness
OPC: OLE for Process Control
PCS: Process Control System
PDA: Personal Digital Assistant
PLC: Programmable Logic Controller
PLM: (Product Lifecycle Management
RGV: Rail Guided Vehicle
RFID: Radio Frequency Identification
SAP: System Applications and Products
SCM: Supply Chain Management
UPS: Uninterruptible Power System
WMS: Warehouse Management System
Contents
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 General principles of the MES
6 Architecture of the MES
7 Management system for the MES
7.1 General
7.2 Material basic data management
7.3 Production order management
7.4 Job scheduling management
7.5 Quality management
7.6 Technological management
7.7 Production process management
7.8 Inventory management
7.9 Logistics scheduling management
7.10 Equipment maintenance management
7.11 Technological tooling management
7.12 Performance management
7.13 Energy management
8 Data storage services
8.1 General
8.2 Real-time database
8.3 Production database
8.4 Historical database
9 Interface specification
9.1 General
9.2 ERP interface
9.3 PLM interface
9.4 PCS interface
9.5 Communication interface
9.6 Other system interfaces
10 Equipment sensing layer
10.1 General
10.2 Data acquisition points
10.3 Upper computer system
11 Basic network hardware
11.1 Data center
11.2 Network planning
11.3 Data security
Annex A (Informative) External interface information for MES in the tire industry
A.1 Information on interface between MES and ERP in the tire industry
A.2 Information on interface between MES and PLM in the tire industry
A.3 Information on interface between MES and PCS in the tire industry
Annex B (Informative) Server deployment list information for the tire industry
轮胎智能制造
制造执行系统（MES）部署 通用规范
1 范围
本文件规定了轮胎智能制造执行系统（MES）总则、部署架构、管理系统、数据存储服务、接口服务、设备传感层、基础网络硬件的要求。
本文件适用于轮胎智能制造MES规划和部署实施。
2 规范性引用文件
下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。
GB/T 25485 工业自动化系统与集成 制造执行系统功能体系结构
GB/T 36587 橡胶塑料机械 术语
3 术语和定义
GB/T 25485和GB/T 36587界定的术语和定义适用于本文件。
4 缩略语
下列缩略语适用于本文件。
AGV：自动导引运输车（Automated Guided Vehicle）
APS：高级计划排程系统（Advanced Planning and Scheduling）
BOM：物料清单（Bill of Material）
BI：商业智能（Business Intelligence）
ERP：企业资源计划（Enterprise Resource Planning）
HR：人力资源（Human Resources）
MES：制造执行系统（Manufacturing Execution System）
MQTT：消息队列遥感传输协议（Message Queuing Telemetry Transport Protocol）
OA：办公自动化（Office Automation）
OEE：设备综合效率（Overall Equipment Effectiveness）
OPC：用于过程控制的工业标准协议（OLE for Process Control）
PCS：过程控制系统（Process Control System）
PDA：掌上电脑（Personal Digital Assistant）
PLC：可编程逻辑控制器（Programmable Logic Controller）
PLM：产品生命周期管理（Product Lifecycle Management）
RGV：有轨制导车辆（Rail Guided Vehicle）
RFID：射频识别（Radio Frequency Identification）
SAP：企业管理解决方案（System Applications and Products）
SCM：供应链管理（Supply Chain Management）
UPS：不间断电源（Uninterruptible Power System）
WMS：仓储管理系统（Warehouse Management System）
