EMC design requirement for tactical missile seeker
1 Scope
This standard specifies the EMC design requirement for tactical missile seeker (hereinafter referred to as seeker), including general design criteria and test requirements.
This standard is applicable to EMC design and test of tactical missile radar seeker. It may serve as a reference for EMC design and test of other seekers.
2 Normative references
The following document contains provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GJB 72A-2002 Terminology for electromagnetic interference and electromagnetic compatibility
GJB 151A-1997 Electromagnetic emission and susceptibility requirements for military equipment and subsystems
GJB 152A-1997 Measurement of electromagnetic emission and susceptibility requirements for military equipment and subsystems
GJB 1210-1991 Grounding, bonding and shielding design practices
GJB/Z 17-1991 Electromagnetic compatibility management guide for military materiel
GJB/Z 25-1991 Design guide for grounding, bonding and shielding for electronic equipments and facilities
QJ 2245-1992 Anti-static requirements for electronic instruments and equipment
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GJB 72A-2002 apply.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Design principle and basis
5 Design process requirements
6 Document requirements
7 Electromagnetic environment analysis requirements
8 EMC index requirements
9 EMC design requirement
10 EMC test
