1 Scope
This standard specifies the type, basic dimension, installation dimension, technical requirements, test methods, inspection rules and mark of panel, cabinet, console and case for industrial-process measurement and control equipment.
This standard is applicable to every kind of panel, cabinet, console and case for industrial-process measurement and control equipment in industrial-process automatic control device, and the instrument panel, cabinet, console and case in other automatic control devices may refer to this standard. Ultra-wide instrument panel and control console are specified by other standard.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest edition of the standards indicated below.
GB 191-1990 "Packaging-Pictorial Marking for Handling of Goods"
GB/T 1048-1990 "Nominal Pressures and Test Pressures for Pipes and Pipe Line Accessories"
GB/T 1497-1985 "Basic Standard for Low-voltage Apparatus"
GB/T 1720-1979 "Method of test for Adhesion of Paint Films"
GB/T 2681-1981 "Colours of Insulated Conductors Used in Electrical Assembly Devices"
GB/T 2682-1981 "Complete Sets of Equipment in the Electric Lights and Button Color"
GB 4208-1993 "Degrees of Protection Provided by Enclosure" (IP code) (eqv IEC 60529:1989)
GB/T 4728.2-1996 "Graphical Symbols for Electrical Diagrams-Part 2: Symbol Elements, Qualifying Symbols and Other Symbols Having General Application" (idt IEC 60617-2:1996)
JB/T 1396-1991 "Drawing Method for Layout Diagram of Panel for Industrial-process Measurement and Control Equipment"
JB/T 1397-1991 "Drawing Method for Wiring and Piping Diagram of Panel for Industrial-process Measurement and Control Equipment"
JB/T 1574-1992 "Connector Base for Industrial-process Measurement and Control Equipment"
3 Types
3.1 Panel for industrial-process measurement and control equipment (hereinafter referred to as "instrument panel")
3.1.1 Basic types
a) Cabinet-type instrument panel;
b) Frame-type instrument panel;
c) Screen-type instrument panel;
d) Channel-type instrument panel.
3.1.2 Instrument panel with outdoor lighting
a) Cabinet-type instrument panel with outdoor lighting;
b) Frame-type instrument panel with outdoor lighting;
c) Screen-type instrument panel with outdoor lighting;
d) Channel-type instrument panel with outdoor lighting.
3.1.3 Instrument panel with attached control console
a) Cabinet-type instrument panel with attached control console;
b) Frame-type instrument panel with attached control console;
c) Screen-type instrument panel with attached control console;
d) Channel-type instrument panel with attached control console.
3.1.4 Instrument panel with outdoor lighting and attached control console
a) Cabinet-type instrument panel with outdoor lighting and attached control console
b) Frame-type instrument panel with outdoor lighting and attached control console;
c) Screen-type instrument panel with outdoor lighting and attached control console;
d) Channel-type instrument panel with outdoor lighting and attached control console.
3.2 Control cabinet for industrial-process measurement and control equipment (hereinafter referred to as "control cabinet")
3.3 Control console for industrial-process measurement and control equipment (hereinafter referred to as "control console")
a) Desk-type control console;
b) Cabinet-type control console;
c) Display-type control console;
d) Arc-type bent control console.
3.4 Case for industrial-process measurement and control equipment (hereinafter referred to as "instrument case")
a) Hang-type instrument case;
b) Vertical instrument case
Foreword I
1 Scope
2 Normative References
3 Types
4 Basic Dimension
5 Installation Dimension
6 Technical Requirements
7 Test Methods
8 Inspection Rules
9 Marks
Appendix A (Informative) Model Compilation Method and Usage Legend for Panel, Cabinet, Console and Case for Industrial-Process Measurement and Control Equipment
