1 Scope
This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, marking, instructions for use, packaging, transportation and storage of indoor stone furniture.
This standard applies to the design and production of indoor stone furniture products. It also can be used as a reference for outdoor stone furniture.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1732 Determination of impact resistance of film
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3324-2008 Wooden furniture—General technical requirements
GB/T 4893.1 Furniture—Assessment of surface resistance to cold liquids
GB/T 4893.2 Furniture—Assessment of surface resistance to wet heat
GB/T 4893.3 Furniture—Assessment of surface resistance to dry heat
GB/T 4893.4 Test of surface coatings of furniture—Part 4: Determination of adhesion—Cross cut
GB/T 4893.7 Test of surface coatings of furniture—Part 7: Determination of surface resistance to alternation of heat and cold
GB/T 4893.8 Test of surface coatings of furniture—Part 8: Determination of wearability
GB/T 4893.9 Test of surface coatings of furniture—Part 9: Determination of resistance to impact
GB 5296.6 Instructions for use of products of consumer interest—Part 6: Furniture
GB 6566 Limit of Radionuclides in building materials
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 9286 Paints and varnishes—Cross cut test for films
GB/T 10357.1 Test of mechanical properties of furniture—Part 1:Strength and durability of tables
GB/T 10357.2 Test of mechanical properties of furniture—Part 2: Stability of chairs and stools
GB/T 10357.3 Test of mechanical properties of furniture—Part 3: Strength and durability of chairs and stools
GB/T 10357.4 Test of mechanical properties of furniture—Part 4:Stability of storage units
GB/T 10357.5 Test of mechanical properties of furniture—Part 5:Strength and durability of storage units
GB/T 10357.6 Test of mechanical properties of furniture—Part 6:Strength and durability of beds
GB/T 10357.7 Test of mechanical properties of furniture—Part 7: Stability of tables
GB/T 13667.1-2015 Steel bookshelves—Part 1: Bookshelf of single column and multi-column
GB/T 13890-2008 Terms for natural stone
GB/T 28202-2011 Furniture industry terminology
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test method
7 Inspection rules
8 Marking, instructions for use, packaging, transportation and storage
Annex A (Informative) Mechanical property test level of furniture