GB/T 25775-2010 Technical delivery conditions for welding consumables - Type of product, dimensions tolerances and markings
1 Scope
This standard specifies the product type, dimensions, tolerances, delivery conditions, packaging, marking and quality certification for fusion welding consumables.
This standard is applicable to welding consumables such as covered electrodes, welding wires and filler wires, and welding strips.
This standard is not applicable to auxiliary welding materials, such as shielding gases, backing materials, etc.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document applies.
GB/T 5185 Welding and allied processes - Nomenclature of processes and reference numbers (GB/T 5185-2005, ISO 4063: 1998, IDT)
3 Type of product and applicable welding processes
Table 1 below indicates the range of products covered by this standard and processes in which they are used. Within brackets reference numbers from GB/T 5185 are given.
Table 1 Type of product and applicable welding processes
Foreword i
1 Scope
2 Normative references
3 Type of product and applicable welding processes
4 Dimensions and tolerances
5 Delivery conditions
6 Packaging
7 Marking
8 Quality certificate
