1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, package, transport and storage of silk and filament yarn scarves.
This standard is applicable to silk and filament yarn scarves and shawls products.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB 250 Gray scale for assessing change in colour (GB 250—1995, idt ISO 105-A02: 1993)
GB/T 2910 Textile--Binary fiber mixtures--Quantitative chemical analysis (GB/T 2910—1997, eqv ISO 1833: 1977);
GB/T 2911 Textiles--Ternary fiber mixtures--Quantitative analysis (GB/T 2911—1997, eqv ISO 5088: 1976):
GB/T 3920 Textiles—Tests for colour fastness—Colour fastness to rubbing (GB/T 3920—1997, eqv ISO 105-X12: 1993)
GB/T 3921.1 Textiles—Tests for colour fastness—Colour fastness to washing: test 1 (GB/T 3921.1—1997, eqv ISO 105-C01: 1989)
GB/T 3921.3 Textiles—Tests for colour fastness—Colour fastness to washing: test 3 (GB/T 3921.3—1997, eqv ISO 105-C03: 1989)
GB/T 3922 Textiles--Testing method for colour fastness to perspiration (GB/T 3922—1995, eqv ISO 105-E04: 1994)
CB/T 4841.1 1/1 Colour cards of standard depths for dyeing with dyestuffs
GB 5296.4 Instructions for use of products of consumer interest--Instructions for use of textiles and apparel
GB/T 5711 Textiles—Tests for colour fastness—Colour fastness to dry cleaning (GB/T 5711—1997, eqv ISO 105-D01: 1993)
GB/T 5713 Textiles—Tests for colour fastness—Colour fastness to water (GB/T 5713—1997, eqv ISO 105-E01: 1994)
GB/T 8170 Rules for rounding off of numerical values
GB/T 8427—1998 Textiles-Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test (eqv ISO 105-B02:1994)
GB/T 8628 Textiles-Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (GB/T 8628—2001, eqv ISO 3759: 1994)
GB/T 8629—2001 Textiles― Domestic washing and drying procedures for textile testing (eqv ISO 6330: 2000)
GB/T 8630 Textiles-Determination of dimensional change in washing and drying (GB/T 8630—2002, ISO 5077: 1984, MOD)
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB 18401 National general safety technical code for textile products
GB/T 19981.2-2005 Textiles-Textiles-Professional care, dry cleaning and wet cleaning of fabrics and garments Part2: Procedure for testing performance when dry cleaning and finishing using tetrachloroethene
FZ/T 01026 Textile--Quaternary fiber mixtures--Quantitative chemical analysis
FZ/T 01048 Determination method for blending ratio of silk and cashmere blended textiles
FZ/T 01053 Textiles-Identification of fiber content
FZ/T 01057 (All parts) Test method for identification of textile fibers
FZ/T 01095 Textile--Test method of elastane fiber content
FZ/T 80002 Marking packaging transportation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
3 Requirements
3.1 Operating instructions
The directions for use of silk and filament yarn scarves shall be implemented according to the provisions of GB 5296.4 and GB 18401.
3.2 Dimension mark
The trimmed size of silk and filament yarn scarves may be marked by the geometric dimension of scarves in centimeter. For example: the rectangle scarves may be marked with length × width; the fichu and shawl may be marked with the bottom length × high.
3.3 Basic safety performance
The basic safety performance of silk and filament yarn scarves may be implemented according to the provisions of GB 18401.
3.4 Inner quality requirements
3.4.1 See Table 1 for the grading requirements for the inner quality of silk and regenerated cellulose silk scarves.
Foreword I
1 Scope
2 Normative References
3 Requirements
4 Test Methods
5 Inspection Rules
6 Marking, Package, Transportation and Storage
7 Others
