1 Application Scope
Application scope of motorcycles shall be in accordance with Article 1 of the Rules.
2 Terminologies and Definitions
Terminologies and definitions for motorcycles shall be in accordance with Article 2 of the Rules.
Terminologies and definitions relevant to product certification shall be in accordance with the “Regulations on Compulsory Product Certification” and all kinds of rules.
3 Reference Standards for Certification
The standards referenced for certification shall be in accordance with Attachment 1 – "Reference Standards for Type Test and Test Items" of the Rules.
In principle, the standards on which the certification and testing are based on shall be the latest editions issued by the administrative department of standardization of the nation. New applicable standards or other editions of service standards, if required, shall be added in accordance with CNCA’s announcements applicable to relevant standards or technical decisions of CNCA Technical Expert Panel (TC12) on Motorcycles and Components.
Producers and production enterprises shall consciously comply with compulsory requirements of national laws and regulations for safety, environmental protection, energy conservation and burglary prevention of motorcycles as well as those of relevant standards that are not completely (or partially) included into the Regulations
4 Certification Mode
Certification mode of motorcycles shall be in accordance with Article 4 of the Rules.
Based on the requirements of the Regulations and CNCA-00C-003 and the differences in production mode, enterprise management level and product characteristics, CQC adopts different certification modes in the specific implementation of type test, initial plant inspection and post-certification follow-up inspection.
Basic mode:
Contents
0 Introduction 1
1 Application Scope 1
2 Terminologies and Definitions 1
3 Reference Standards for Certification 1
4 Certification Mode 2
5 Certification Unit Division 2
6 Certification Authorization 3
6.1 Application and Acceptance of Certification Authorization 3
6.2 Certification Authorization Data 3
6.3 Implementation Arrangement 3
6.4 Certification Process 3
7 Certification Implementation 4
7.1 Type Test 4
7.1.1 Type Test Scheme 4
7.1.2 Requirements for Sample in Type Test 4
7.1.3 Type Test Items and Requirements 5
7.1.4 Implementation of Type Test 5
7.1.5 Type Test Report 5
7.2 Initial Plant Inspection 5
7.2.1 Basic Principles 6
7.2.2 Plant Inspection 6
7.2.2.1 Production Conformity Control Plan Review 6
7.2.2.2 Production Conformity Plant Inspection 6
7.2.3 Structure and Technical Parameter Check and Inspection 7
7.2.4 Result of Plant Inspection 7
7.2.5 Time of Plant Inspection 7
7.3 Adoption on Relevant Certification Result 7
7.4 Certification Evaluation and Decision 7
7.5 Time Limit for Certification 7
8 Post-certification Supervision 8
8.1 Post-certification Follow-up Inspection 9
8.1.1 Principles of Post-certification Follow-up Inspection 9
8.1.2 Contents of Follow-up Inspection after Certification 9
8.2 Sample Testing/Inspection on Production Site 9
8.2.1 Principles of Sample Testing/Inspection on Production Site 9
8.2.2 Contents of Sample Testing/Inspection on Production Site 9
8.3 Market Sampling Testing/Inspection 9
8.3.1 Principles of Market Sampling Testing/Inspection 9
8.3.2 Contents of Market Sampling Testing/Inspection 10
8.4 Quality Information Application 10
8.5 Frequency and Time of Post-certification Supervision 10
8.6 Record of Post-certification Supervision 10
8.7 Evaluation on Post-certification Supervision Results 10
8.8 Conformity Parameter Management 10
9 Certificate 10
9.1 Maintenance of Certificate 10
9.2 Content of Certificate 10
9.3 Requirements for Certification Change (including Standard Revision) 10
9.3.1 Basic Requirements for Certification Change 10
9.3.2 Certification Change Test and Plant Inspection 12
9.3.3 Change of Certification Change Data 12
9.4 Suspension, Cancellation and Withdrawal of Certificate 12
9.5 Application of Certificate 12
10 Certification Mark and Vehicle Conformity Certificate 13
10.1 Certification Mark 13
10.2 Mark Application 13
10.3 Vehicle Conformity Certificate 13
11 Charge 13
12. Certification Responsibility 13
13 Relevant Process and Time Limit Requirements of Technical Disputes and Complaints 14
Attachment 1: List of Certification Authorization Data 15
Attachment 2: Type Test Scheme for Motorcycles 17
Attachment 3: Reference Standards of Type Test and Test Items 33
Attachment 4: Utilization of Production Enterprise’s Resources 37
Attachment 5: Principles for Classification of Production Enterprise 40
Attachment 6: Content Requirements for Production Conformity Control Plan and Executive Report 43
