1 General
1.0.1 To meet the requirements of mushroom growth of communication construction or to solve power problems for equipments of the areas without power or the power-shortage areas, this specification is formulated.
1.0.2 This specification is applicable to construction, extension and renovation engineering of flat-plate-type solar photovoltaic power system and could be used as a reference for designs of other types of solar photovoltaic power systems.
1.0.3 Normative references:
"Terminology for solar photovoltaic energy system"
Tentative Specification for Designing Anti-seismic Installation of Communication Equipment
Specification for Designing Post & Telecommunication Communication Power System
Tentative Technical Stipulation for Grounding Design of Communication Bureau (Station)
General Specification for Paint Coating
"Electrodeposited Coating and Chemical Cladding of Electrical Products"
1.0.4 Prior to the design, detailed exploration shall be carried for the installation point to learn about environmental conditions, climate conditions, wind force conditions and solar resource of the area and provide necessary material for the installation design.
1.0.5 Technical economical comparison shall be carried out for the scheme during designing, operation and maintenance requirements of construction shall be taken into full consideration to achieve the proposes that advanced technology, economy and rationality, safety and usability and guarantee quality and increase the economic benefit.
1.0.6 Solar modules, equipment and materials used in the design shall be qualified products tested and accepted by relevant national departments.
1.0.7 In order to meet the requirement of development, the design shall be corresponding to the development planning. The overall plan and priority construction size of the installation capacity shall combine with the long-term development planning, equipment load capacity of the near term should be used as the main capacity of the solar-cell-array and civil construction facilities should combine with long-term planning.
1.0.8 Any thing un-specified in this specification shall be carried out according to relevant national standards.
Contents
1 General
2 General Requirements of Solar Photovoltaic Power System
3 Equipment Configuration of Solar Photovoltaic Power System
3.1 Composition Mode of Power Supply System
3.2 Configuration Requirements of Power Control Equipment
3.3 Array Capacity Design
3.4 Configuration of Storage Battery Sets
3.5 Power System Feeder Line and Pipeline Configuration
4 Installation Engineering Design of Solar Photovoltaic Power System
4.1 Foundation Design of Array
4.2 Device Installation and Layout
4.3 System Protective Design
Appendix A Reference Data
Appendix B Solar Energy of Nationwide Big Cities
Appendix C Explanation of Wording in This Specification
Additional Explanation List of Chief Development Organization, Participating Organizations and Chief Drafting Staff of This Specification
