GB/T 3903.25-2021 Footwear—Test methods for whole shoe—Heel attachment English
1 Scope
This document specifies a method for the determination of the heel attachment of footwear.
It applies to woman's medium and high heeled footwear.
This test method measures three related wear properties:
——The rigidity of the shoe backpart during normal walking;
——The amount of permanent deformation of the backpart caused by a fairly large force applied to the heel in a backward direction;
——The force required to detach the heel.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7500-1 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
——ISO Online browsing platform: available at https://www.iso.org/obp
——IEC Electropedia: available at http://www.electropedia.org/
3.1
heel attachment strength
maximum force measured under test conditions required to detach the heel from the sole/insole assembly
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Test equipment and materials
5 Sampling and conditioning
6 Test method
7 Expression of results
8 Test report
