1 Scope of Application
This Rule is applicable to the lighting apparatus, including fixed general purpose luminaires with supply voltage between 36V and 1000V; recessed luminaires; portable general purpose luminaires; aquarium luminaires; outlet installed night light; recessed luminaires on ground surface; portable luminaire for children; fluorescent lamp ballast with supply voltage between 36V and 1000V; ballast for discharge lamp (except fluorescent lamp); ac electronic ballast for fluorescent lamp; DC or AC electronic ballast for discharge lamp (fluorescent lamp); DC or AC electronic controls for LED module.
The adjustment of application scope caused by the changes of laws, regulations, relevant products standards, technologies, and industrial policies, shall be subject to the announcement issued by CNCA.
2 Terms and Definitions
Design appraisal: In this Rule, it is a non-experimental verification measure, refers to methods of examination and calculation of design drawing to prove that products comply with the certification standards.
3 Certification Standards
0 Introduction 1
1 Scope of Application 1
2 Terms and Definitions 1
3 Certification Standards 2
4 Certification Mode 2
5 Certification Unit Division 3
6 Certification Entrustment 3
6.1 Proposal and Acceptance of Certification Entrustment 3
6.2 Application Information 3
6.3 Implementation Arrangement 4
7 Certification Implementation 4
7.1 Type Test 4
7.2 Design Appraisal 5
7.3 Certification Evaluation and Decision 5
7.4 Certification Time Limit 5
8 Supervision after Certification 6
8.1 Follow-up Inspection after Certification 6
8.2 Sampling Testing or Inspection on Production Site 6
8.3 Market Sampling Testing/Inspection 7
8.4 Frequency and Time of Supervision after Certification 7
8.5 Record of Supervision after Certification 7
8.6 Result Evaluation of Supervision after Certification 7
9 Certificate 7
9.1 Maintaining 7
9.2 Alteration of Certificated Products 7
9.3 Expansion of Certificated Product 8
9.4 Cancellation, Suspension and Revocation of Certificate 8
9.5 Application 8
10 Certification Mark 8
10.1 Allowable Mark Pattern 9
10.2 Marking Mode 9
11 Charging 9
12 Certification Responsibility 9
13 Certification Implementation Regulations 9
